Zenith ZN-501S Remote Control

Save Code list for future reference Refer to the setup procedure below and look up the 3 digit code for your brand of TV, VCR, etc., from the list below. Refer to the Owner’s Manual for your remote for more information. Direct Code Entry 1. Press and hold the CODE SEARCH button until the red indicator stays on, then release the CODE SEARCH button. 2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit. 3. Enter the 3 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes. 4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand. Code Search (by Brand) Lets you search for a code for a specific Brand within the Code Library for a particular manufacturer. 1. Turn on the device (TV, VCR, etc.) to be controlled. 2. Press and hold the CODE SEARCH button until the red indicator remains on, then release the CODE SEARCH button. 3. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks off once. 4. Press and release the numeric button (0-9) corresponding to desired Manufacturer (see table below). Note, pressing “0” performs a full library search same as Device Library Code Search Method. 5. Press the CHANNEL UP button ((or POWER or PLAY (VCR only)) repeatedly until the device to be controlled changes channel. 6. Press and release MUTE to install the code. Digit 1

TV RCA, GE, Proscan Zenith Philips, Magnavox Sony, Panasonic, Sharp, Toshiba, Daewoo

Note, when all codes under a Brand have been searched the red indicator flashes rapidly for 3 seconds. Code Search (by Device) If after trying “Direct Code Entry” or “Code Search (by Brand)” your device does not respond, or if your brand is not listed, try doing a device search of the code library for your code by following the steps below. 1. Manually turn on the device (TV, VCR, etc.) to be controlled. 2. Press and hold the CODE SEARCH button until the red indicator stays on, then release the CODE SEARCH button. 3. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit. 4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks, then stays lit. 5. Press and release MUTE to install the code. Most users will want to store VCR codes under the VCR button, Cable codes under Cable, etc. If you want to store a VCR code under Cable, etc., first follow the procedure for Direct Code Entry and press Cable in step 2 of Direct Code Entry, then enter ANY VCR code in step 3 of Direct Code Entry. Then follow the steps above for Brand Search or Complete Search. Brand Search Table Look up your brand in the appropriate column (TV, VCR, etc.) in the table below. Look for the digit (1, 2, 3, etc.) that applies to your brand, and enter it in step 4 of “Code Search (by Brand).”

CABLE Scientific Atlanta

7 8

Hitachi, Sanyo, LG-Goldstar, Samsung, JVC, Mitsubishi Sylvania, Fisher, Curtis-Mathes, Emerson N/A N/A

VCR/DVD/DVR RCA, GE, Proscan Zenith, Apex Marantz, Philips, Magnavox Sony, Panasonic, Sharp, Toshiba, Daewoo, Yamaha, Denon Hitachi, Sanyo, LG-Goldstar, Samsung, JVC, Mitsubishi Sylvania, Fisher, Curtis-Mathes, Emerson N/A N/A

9 0

N/A ALL

N/A ALL

N/A ALL

2 3 4

5

6

Jerrold Tocom, General Instrument, RCA, GE, Proscan, Pioneer Zenith, Gemini

Philips, Magnavox N/A N/A

SAT/DBS RCA, GE, Proscan, Pioneer Zenith, Gemini Philips, Magnavox Sony, Panasonic, Sharp, Toshiba, Hitachi, JVC, Samsung

CD/AUDIO RCA, GE, Proscan Zenith Marantz, Philips, Magnavox Sony, Panasonic, Technics, Sharp, Toshiba

Hitachi, Sanyo, JVC, LG-Goldstar, Samsung, Mitsubishi General Instrument, Sylvania, Fisher, Echostar, Dish, Curtis-Mathes, Hughes, Primestar Emerson, Optimus N/A Pioneer, Teac, Nad N/A Kenwood, Yamaha, Denon, Onkyo N/A N/A ALL ALL

Guarde esta lista de códigos para futura referencia. Refiérase a