Winland Electronics - WB800 - Waterbug 8 Zone, 4 Sensors

WB-800 Multi-Zone Supervised Water Detection Connects to any hard wire or wireless alarm system. Hardwire powered. Includes four (4) surface probes supervised (W-S-S) Dedicated single relay output simplifies wiring while 8 LED’s indicate which zone is in alarm.

• Will not alarm due to condensation or humidity. • Connect up to 8 W-S-S probes (1 per zone) up to 500’ (152.4 m) from console using 22-18 AWG twisted pair. • Connect up to 16 W-S-U probes (2 per zone) up to 500’ (152.4 m) from console using 22-18 AWG twisted pair.

Four Probe Contacts

Mounting

Drill in this innermost center circle only.

Warehouse / Storage

Remote Home

Water Water

Server Room

Water

Alarm

Specifications:

You must mount the probe so these four stainless steel contacts are against the surface to be monitored. Water

• • • •

No Alarm

Power Requirements:

12/24VDC 100 mA 12/24VAC 200 mA Operating Range: Console and probe 32 to 140° F (0 to 60° C) Output: 1 Form C Relay (N.O./N.C.) 1 Amp @ 24 VDC, resistive Buzzer: Audible alarm with silence feature (85 dB @ 10 cm @ 12 VDC); pulsed Probes Included: 4 Surface probes supervised (W-S-S) Max distance between probe/console: 500’ (152.4 m) per probe Console dimensions: 6.55 x 4.70 x 1” (16.6 x 11.9 x 2.5 cm) Probe dimensions: Surface (W-S-S and W-S-U) 2 x 3 x 0.88” (5.1 x 7.6 x 2.2 cm) Under Carpet (W-UC-S and W-UC-U) 2 x 3 x 0.18” (5.1 x 7.6 x .5 cm) Mounting: Standard 3-gang box

Accessory Probes:

Detection Water Probe Surface (supervised) Water Probe Under Carpet (supervised) Water Probe Surface (unsupervised) Water Probe Under Carpet (unsupervised)

Model Number W-S-S W-UC-S W-S-U W-UC-U www.winland.com 800-635-4269 507-625-7231 WB-800:10162012