Vermeer BC1000XL

MPP100 1 0 0

T o n

P o r t a b l e

P i n

P r e s s

Machinery, LLC W1222 Linden Road Ixonia, Wisconsin 53036 USA Phone: 800.248.8405 or 262.567.3993 Fax: 262.567.4307 www.wtcmachinery.com

MACHINERY, LLC W1222 LINDEN ROAD, IXONIA, WISCONSIN 53036 Phone: 800.248.8405 or 262.567.3993 – Fax: 262-569-4307 www.wtcmachinery.com

MANUFACTURERS/BENEFICIARY'S WARRANTY CERTIFICATE

WTC MACHINERY, LLC WARRANTY WTC MACHINERY, LLC warrants its products to be free from defects in material and workmanship under normal use and service for a period of twelve (12) months after date of shipment. WTC MACHINERY, LLC undertakes to be responsible for any defect that may arise due to faulty raw materials, design, workmanship and defective parts and to replace them without extra cost. Our warranty is not transferable.

WTC MACHINERY, LLC shall have the option of requiring the return of all parts claimed defective. Parts proved to be defective, due to defect in workmanship and/or material, shall be either repaired or replaced free of charge, F.O.B. our designated factory. All parts warranty claims are subject to inspection by WTC MACHINERY, LLC and acceptance at the factory Our warranty does not obligate us to bear the cost of labor or transportation charges in connection with the replacement or repair of defective parts and the removal and/or remounting of the parts repaired or replaced under this warranty, unless specifically authorized in writing by WTC MACHINERY, LLC. All parts returned to the factory must be shipped freight prepaid; no collect freight will be accepted by the factory. Forms authorizing such returns for inspection must accompany all returns. This warranty shall not apply to products not manufactured by WTC MACHINERY, LLC. Outside purchased equipment and accessories (not of WTC manufacture) are warranted only to the extent of the original equipment manufacturer's warranty and subject to their allowance to WTC MACHINERY, LLC. In this respect, our warranty obligations must conform and be limited to the warranty extended to WTC MACHINERY, LLC by its suppliers as extended to the customer. We shall, in no event, be liable for consequential damages or contingent liability arising out of the failure of any unit or part to operate properly, or that is subject to: • Ordinary operating wear, abuse, misuse, or overloading; • Repairs or alterations by parties other than WTC MACHINERY, LLC; • The use of improper fluids, contaminated fluids or improper filtering; • The use of improper voltage hookup in the electrical connections of any equipment; • Negligence, accident or damages due to deterioration during periods of storage by the purchaser prior to installation and operation; • Damages occurred in shipment after leaving factory en route to customers’ delivery point, as title to equipment passes to customer when loaded onboard for shipment, f.o.b. factory, and customer must place his own claim against damaged goods directly to the shipping company and not against WTC MACHINERY, LLC, its factory, or any of its personnel. • Damages due to circumstances beyond the control of WTC MACHINERY, LLC and in connection with fulfilling any obligation under this warranty. This warranty is exclusive and is in lieu of all other expressed and implied warranties, including but not limited to implied warranties or merchantability and fitness for a particular purpose. WTC MACHINERY, LLC shall not be subject to any other obligations or liabilities whatsoever with respect to equipment manufactured or supplied by WTC MACHINERY, LLC, or services rendered to it.

Machinery LLC MPP100 100-Ton Portable Pin Press

TABLE OF CONTENTS

TABLE OF CONTENTS SECTION 1: INTRODUCTION .....................................................………………………………… 1

SECTION 2: MPP100 100-TON PORTABLE PIN PRESS SPECIFICATIONS ……..………..… 2 - 4 Specifications.....................……………………………………...….. 2 Parts Identification and Model Listing …............................….…... 3 Parts Listing ………………………………………………………….. 4

SECTION 3: SETUP …………............………………………………………………………………... 5 - 9 A)