Toro Power Max HD 926 OXE 26 inch 265cc Two Stage Snow Blower

Form No. 3369-558 Rev A

Parts Catalog

Power Max 926 OXE Snowthrower

Register at www.Toro.com.

Model No. 38661—Serial No. 312000001 and Up

Original Instructions (EN)

Ordering Replacement Parts For example, a wheel assembly might be identified by reference number 6, the tire by 6:1, the valve by 6:2, and the wheel by 6:3. When you order the assembly identified by reference number 6, you receive all parts identified by reference numbers 6:1,6:2, and 6:3. However, you may also order any part individually. Reference numbers of this type appear in illustration and in parts lists.

To order replacement parts, please supply the part number, the quantity, and the description of each part desired. Understanding Reference Numbers Each identified part in an illustration has a reference number. The reference number for a part also appears in the parts list, along with other information about the part. This catalog uses two special reference number formats, one to indicate parts in a service assembly and another to indicate the quantity of a given part in an illustration.

Reference Numbers Indicating Quantity In an illustration, if a reference number indicates more than one part, the reference number has the form nX y. The n represents the quantity of the part, the X is the multiplication symbol, and the y represents the reference number.

Service Assembly Reference Numbers Parts in service assemblies have reference numbers in the form a:b. The a represents the reference number of the entire service assembly and the b represents a sequential number unique to each part within the service assembly.

For example, in an illustration, the reference number 2X 37 means that two of the parts identified by reference number 37 are indicated.

List of Abbreviations AR: as required

HOC: height-of-cut

RRB: rear roller brush

ASM: assembly

HSBH: hex socket button head

SFH: slotted fillister head

BBC: blade brake control

HSFH: hex socket flat head

SHH: slotted hex head

BHTF: button head thread forming

HSH: hex socket head

SHWH: slotted hex washer head

CARR: carriage

HWH: hex washer head

SPH: slotted pan head

CCW: counter clockwise

SQH: square head

CW: clockwise

HWHTF: hex washer head thread forming

DEG: degrees

HYD: hydraulic

STD: standard

DPA: Dual Point Adjustment

LH: left hand

TAP: self tapping

ECM: electronic control module

LP: Liquid Propane

TTH: torx truss head

EXT: external

NI: nylon insert

FH: flat head

NPTF: national pipe thread fine

GA: gauge

PFH: phillips flat head

HD: heavy-duty

PPH: phillips pan head

HF: hex flange

PPHTF: phillips pan head thread forming

HH: hex head HHF: hex head flange

PRH: phillips round head PTH: phillips truss head

HHFTF: hex head flange thread forming

PTO: power-take-off

HJ: hex jam

RH: right hand

HLH: hex lag head

ROPS: roll-over protection system

2

SRH: slotted round head

Contents Housing Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Traction Frame Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Idler and Linkage Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Auger and Impeller Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 26 Inch Auger Gearcase Assembly No. 108-7328 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Impeller Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Engine Assembly . . . . . . . . . . . . . . . . .