Toro 53805 Lawn Master II 4-Zone Landscape Sprinkler System Water Time - ecxtra-quickref.pdf

Use this guide for quick reference when you want to: Change Time and Day or Date ................................... page 2 Review or Change Watering Day Schedule ............... page 2 Review or Change Program Start Times ................... page 4 Review or Change Zone Run Times ........................... page 5 Use Manual Operations ............................................... page 6 Turn Off The Timer ....................................................... page 7 Use the Rain Delay Feature......................................... page 8 Use the Season Adjust Feature .................................. page 8 Questions? Call Toro Customer Support @ 1-800-895-4922

Quick Reference Guide

Quick Reference Guide

2 To Change Time and Date 1. Turn the control dial to the CURRENT TIME/DAY position. 2. To adjust the flashing portion of the display, press the +/ON or –/OFF button. 3. Press the NEXT button. 4. Repeat steps 2 and 3 to set the following current information: minutes, year, month and day. 5. Return the control dial to the RUN position.

2. Set the PROGRAMS switch as necessary to select the desired program. 3. Press the +/ON or –/OFF button as needed to select CAL. 4. Press the NEXT button. 5. To select the day (flashing), press the +/ON button. To remove the day, press the –/OFF button. Repeat this step until only the desired watering days are shown. 6. Return the control dial to the RUN position.

Interval Schedule

Calendar Schedule

1. Turn the control dial to the WATERING DAYS position. 2. Set the PROGRAMS switch as necessary to select the desired program.

1. Turn the control dial to the WATERING DAYS position.

3. Press the +/ON or –/OFF button to select Int.

To Review or Change Watering Day Schedule

4. Press the NEXT button.

Day Exclusion

5. To select the Interval day (1–7), press the+/ON or –/OFF button. 6. Press the NEXT button. 7. To select the Interval start day, press the +/ON or –/OFF button.

1.

8. Return the control dial to the RUN position.

2.

Odd or Even Schedule 1. Turn the control dial to the WATERING DAYS position. 2. Set the PROGRAMS switch as necessary to select the desired program. 3. Press the +/ON or –/OFF button to select Odd or Even. 4. Return the control dial to the RUN position.

3.

4.

Note: The selected program must have an Interval or Odd/Even watering schedule to use the Day Exclusion feature. Turn the control dial to the WATERING DAYS position. Set the PROGRAMS switch as necessary to select the desired program. Press the NEXT button as needed to display d E. The currently elegible days of the week will be displayed and SU (Sunday) will begin flashing. To exclude Sunday from the watering schedule, press the –/OFF button. To keep Sunday and skip to the next day, press the +/ON button; MO (Monday) will now begin flashing. Continue to exclude or skip each day of the week as needed.

3

4

Turning Off A Program 1. Turn the control dial to the WATERING DAYS position. 2. Set the PROGRAMS switch as needed to select the desired program. 3. Press the+/ON or –/OFF button to select OFF. 4. Return the control dial to the RUN position.

3. Press the +/ON or –/OFF button to select the desired program start time number. 4. Press the NEXT button. Note: To remove a start time, select OFF by pressing the +/ON and –/OFF buttons at the same time, and continue at step 8. 5. To set the hour, press the +/ON or –/OFF button. 6. Press the NEXT button. 7. To set the minutes, press the +/ON or –/OFF button.

To Review or Change Program Start Times 1. Turn the control dial to the START TIME position. 2. Set the PROGRAMS switch as needed to select the desired program.

8. Press the NEXT button. The next program start time number will begin flashing. 9. To review or change another start time, return to step 3. 10. Return the control dial to the RUN position.

To Review or Change Zone Run Times 1. Turn the control dial to the SET ZONE TIMES position. 2. Set the PROGRAMS switch as needed to select the desired program. 3. Station number 1 will be flashing and its current run time or OFF will be show