Sony CDX-GT410U CD Player

2-890-968-21 (1)

A

Source selector (not supplied) Sélecteur de source (non fourni) Supplied with XA-C40 Fourni avec le XA-C40

AUDIO OUT REAR*

FM/AM Compact Disc Player

XA-C40

*1

BUS AUDIO IN

L R

* AUDIO OUT SUB/REAR

Installation/Connections

BUS AUDIO OUT IN REAR/SUB

from car antenna (aerial) à partir de l’antenne du véhicule

B

Installation/Connexions

Supplied with the CD/MD changer Fourni avec le changeur de CD/MD

AUDIO OUT REAR*2

*1 RCA pin cord (not supplied) *2 AUDIO OUT can be switched SUB or REAR. For details, see the supplied Operating Instructions.

BUS CONTROL IN

Fuse (10 A) Fusible (10 A)

BUS AUDIO IN

3

Blue/white striped Rayé bleu/blanc

AMP REM

*1 Cordon à broche RCA (non fourni) *2 AUDIO OUT peut être commuté sur SUB ou REAR. Pour obtenir plus de détails, reportez-vous au mode d’emploi fourni.



Max. supply current 0.3 A Courant max. fourni 0,3 A

BUS CONTROL IN

White Blanc

Black Noir

Left Gauche

1

White/black striped Rayé blanc/noir Gray Gris

Blue Bleu

Right Droit

BUS AUDIO IN

Gray/black striped Rayé gris/noir Green Vert

Source selector* Sélecteur de source*

Red Rouge

Left Gauche

XA-C40

BUS CONTROL IN

2

4

Green/black striped Rayé vert/noir

* not supplied non fourni

CDX-GT410U CDX-GT41UW

ANT REM Max. supply current 0.1 A Courant max. fourni 0,1 A

Purple Violet

Yellow Jaune

Right Droit

5

Purple/black striped Rayé volet/noir

© 2006 Sony Corporation Printed in Thailand

Connection example

Cautions







×2





• This unit is designed for negative ground (earth) 12 V DC operation only. • Do not get the leads under a screw, or caught in moving parts (e.g. seat railing). • Before making connections, turn the car ignition off to avoid short circuits. • Connect the yellow and red power supply leads only after all other leads have been connected. • Run all ground (earth) leads to a common ground (earth) point. • Be sure to insulate any loose unconnected leads with electrical tape for safety. • The use of optical instruments with this product will increase eye hazard. Notes on the power supply lead (yellow) • When connecting this unit in combination with other stereo components, the connected car circuit’s rating must be higher than the sum of each component’s fuse. • When no car circuits are rated high enough, connect the unit directly to the battery.

×4

Front speaker Haut-parleur avant

Rear speaker Haut-parleur arrière

Power amplifier Amplificateur de puissance

Tip (-B- ) For connecting two or more CD/MD changers, the source selector XA-C40 (not supplied) is necessary.

Connection diagram  To a metal surface of the car

First connect the black ground (earth) lead, then connect the yellow and red power supply leads.

 To the power antenna (aerial) control lead or power supply lead of antenna (aerial) booster Notes • It is not necessary to connect this lead if there is no power antenna (aerial) or antenna (aerial) booster, or with a manually-operated telescopic antenna (aerial). • When your car has a built-in FM/AM antenna (aerial) in the rear/side glass, see “Notes on the control and power supply leads.”

 To AMP REMOTE IN of an optional power amplifier

Parts Iist

Equipment used in illustrations (not supplied) Appareils utilisés dans les illustrations (non fournis)

Notes (-A) • Be sure to connect the ground (earth) lead before connecting the amplifier. • The alarm will only sound if the built-in amplifier is used.

• The numbers in the list are keyed to those in the instructions. • The bracket  and the protection collar  are attached to the unit before shipping. Before mounting the unit, use the release keys  to remove the bracket  and the protection collar  from the unit. For details, see “Removing the protection collar and the bracket ()” on the reverse side of the sheet. • Keep the release keys  for future use as they are also necessary if you remove the unit from your car. Caution Handle the bracket  carefully to avoid injuring your fingers.

This connection is only for amplifiers. Connecting any other system may damage the unit.

 To