Simplicity for Children 4-in-1 Convertible 3040 Crib

Customer Service 1-800-858-8323 501 S. 9th St. Reading, PA 19602

4-in-1 Bassinet, Bedside Sleeper, Changing Table, & Rocking Cradle MoisОs, Cuna, y Cambiador Berceau, co-dormeuse et table ˆ langer.

Fashion design: Disney Pooh Model No: 3112 DOH For Customer Service call 800-858-8323

Bassinet Warnings Thank you for purchasing the 4-IN-1 BASSINET. This product is manufactured by Simplicity, Inc. Your 4-IN-1 BEDSIDE BASSINET will be able to be used as a Bassinet, Bedside Sleeper and a Changing Table and Rocking Cradle.

PLEASE FOLLOW ALL OF THE FOLLOWING DIRECTIONS IN ASSEMBLING AND MOVING THE 4-IN-1 BASSINET THROUGH ITS VARIOUS STAGES OF

A. Basket frame with foam sleeve (1) Do not remove foam from frame

Parts

WARNING

USE.

If you have any questions regarding this product, contact Simplicity, Inc. 501 South 9th St., Reading, PA 19602(USA), phone 1-800-858-8323, or our distributor Elfe Juvenile Products in Canada: 4580 Hickmore, St-Laurent, Quebec H4T 1K2, 1-800-667-8184 (Canada) 1-514-344-3533 (Montreal)

Screws

Canopy anchor

B. Cross tube with foam sleeve (1) Do not remove foam

D. Removable top tube with foam sleeve (1) Do not remove foam

C. Small Phillips cross tube screw (2)

P. Medium Phillips screw (2)

E. Rocker base (2) F. Rocker legs (4)

Z. Mobile base assembly screws

G. Support tubes (2) H. End plate (2)

K. Accessory basket tubes (2)

I. Large Phillips screw (8)

L. Accessory basket fabric assembly (1) M. Medium lock nuts (2) O. Mattress support (1) Q. Mattress (1) R. Canopy (1)

S. Retainer plate and strap (1) T. Strap connectors (2)

W. Mobile toys and propeller X. Mobile arm

Y. Mobile inside and outside base

Do not leave child unattended in the Bassinet in the rocking mode with wheels retracted.

SUFFOCATION HAZARD–Infants can suffocate: • In gaps between an extra pad and side of the bassinet/cradle NEVER add a mattress, pillow, comforter or padding. Use ONLY the pad provided by the manufacturer.

If a sheet is used with the pad, use only the one provided by the bassinet or cradle manufacturer or one specifically designed to fit the dimension of the bassinet or cradle mattress.

N. Fabric assembly (1)

V. Phillips screwdriver

FALL HAZARD–To help prevent falls, do not use this product when the infant begins to push up on hands and knees or has reached manufacturer’s recommended maximum weight, whichever comes first. Maximum recommended weight is 14 lbs.

• On soft bedding.

J. Large lock nuts (4)

U. Allen wrench

WARNING – Failure to follow these warnings and instructions could result in serious injury or death.

Inside with power cable Outside

Do not leave child unattended in the bassinet with the wheels on the bassinet frame in the "up " position. -Toys are not to be “mouthed” by the baby and should be positioned clearly out of reach of the baby’s face and mouth. -Always attach all provided fasteners tightly according to the instructions. Check frequently.

-Do not add additional strings or straps to a crib or playpen.

Instructions for assembly as a Bassinet/Bedside Sleeper–Lower Frame Assembly

1. Unpack the 4-IN-1 BASSINET.

Check parts against the parts list on the inside front cover. DO NOT REMOVE FOAM PADDING FROM ANY FRAME PARTS.

c. Insert the large Phillips head screws through the caster housings into the tubes and tighten. Illustration 3c.

2. Assemble rocker

a. Insert a rocker leg (F) into the opening at one end of a rocker base. Make sure that snap buttons do not go into the base. (E). Snap buttons must face inwards. Illustration 2a. 2a. Insert rocker leg into rocker base

3. Install the accessory basket.

a. Slide the two basket tubes (K) into the pockets of the accessory basket fabric assembly (L). Illustration 3a.

3c. Screw basket tubes to end

4. Assemble Support Tubes and Strap Connectors

c. Install the end plates (H) by snapping over the vertical support tubes. Make sure to have strap connectors (T) above end plates. illustration 4c. d. Attach the basket straps to the two support tubes (G), adjusting the tension so the accessory basket is pulled up tight. Wrap excess st