Pulsar Tech Gear PF3183 Wrist Watch

CAL. 7T62 ALARM & CHRONOGRAPH ● Hour, minute and small second hands ● Date displayed in numerals

STOPWATCH ● Measures up to 60 minutes in 1/5 second increments. ● Split time measurement

SINGLE-TIME ALARM ● Rings only once at a designated time within the coming 12 hours.

ENGLISH

TIME/CALENDAR

DISPLAY AND CROWN/BUTTONS STOPWATCH minute hand

STOPWATCH 1/5-second hand Minute hand

Hour hand

English

A a Small second hand

b

c

CROWN

6

Date

B ALARM hour hand

2

a: Normal position

ALARM minute hand b: First click

c: Second click

SCREW DOWN CROWN [for models with screw down crown]

Unlocking the crown 1 Turn Crown counterclockwise until you no longer feel the threads turning. 2 Crown can be pulled out.

1 Push Crown back in to normal position.

English

Locking the crown 2 Turn Crown clockwise while pressing it lightly until tight.

3

SETTING THE TIME AND ADJUSTING THE STOPWATCH HAND POSITION

English

● This watch is so designed that the following are all made with the crown at the second click position: 1) main time setting 2) alarm hand adjustment 3) stopwatch hand position adjustment Once the crown is pulled out to the second click, be sure to check and adjust 1) and 2) at the same time. If needed, 3) should also be adjusted then.

CROWN

4

Pull out to second click when the second hand is at the 12 o’clock position.

1) MAIN TIME SETTING Hour hand

Minute hand

CROWN 6

* It is recommended that the hands be set to the time a few minutes ahead of the current time, taking into consideration the time required to set the ALARM hands and to adjust the STOPWATCH hand position if necessary.

English

Small second hand

Turn to set the hour and minute hands.

2) ALARM HAND ADJUSTMENT ● Set the ALARM hands to the time the main time hands indicate.

5

Hour hand

Minute hand

B 6

* ALARM hands move quickly if button B is kept pressed.

English

B ALARM hour hand

Press repeatedly to set ALARM hands to the time indicated by the main time hands.

ALARM minute hand

3) STOPWATCH HAND POSITION ADJUSTMENT ● If the STOPWATCH hands are not in the “0” position, follow the procedure below to set them to the “0” position.

A ▲

6

Press for 2 seconds. * STOPWATCH minute hand turns a full circle.

▲ STOPWATCH minute hand

A

B

▲

B

* The hand moves quickly if button B is kept pressed.

Press for 2 seconds. * STOPWATCH 1/5-second hand turns a full circle.

Press repeatedly to set STOPWATCH 1/5-second hand to the “0” position. * The hand moves quickly if button B is kept pressed.

▲

B

Press repeatedly to set STOPWATCH minute hand to the “0” position.

English

A

6

▲

STOPWATCH 1/5-second hand

7

▲ ● ALARM and STOPWATCH hands can be readjusted in the following order by pressing button A for 2 seconds.

English

▲

STOPWATCH minute hand

▲

( 12Advance hours. )

▲

ALARM hands

a ( Turns full circle. )

a ( Turns full circle. )

* After all the adjustments are completed, check that the main time and alarm hands indicate the same time.

▲

CROWN

8

STOPWATCH 1/5-second hand

Push back in to normal position in accordance with a time signal.

SETTING THE DATE ● Before setting the date, be sure to set the main time.

CROWN

➠

1 Pull out to first click. 2 Turn clockwise until the desired date appears.

➠

3 Push back in to normal position.

English

6

Date

9

STOPWATCH ● The stopwatch can measure up to 60 minutes in 1/5-second increments. ● After 60 minutes, it will start counting again from “0” repeatedly up to 12 hours. STOPWATCH 1/5-second hand

English

STOPWATCH minute hand

A Start / Stop / Restart 6

B Reset / Split /Split release

10

● Before using the stopwatch, be sure to check that the crown is set at the normal position and that the STOPWATCH hands are reset to the “0” position. * If the STOPWATCH hands do not return to the “0” position when the stopwatch is reset to “0”, follow the procedure in “SETTING THE TIME AND ADJUSTING THE STOPWATCH HAND POSITION”.

Split time measurement

STOP

B

English

A

SPLIT RELEASE

▲

SPLIT

▲

B

▲

B

▲

A START

RESET

Measurement of two competitors

B

▲

A 2ND CO