One For All URC-4605 Remote Control - 6357bc34-ce39-44ae-9cd7-c642c5aeead3.pdf

URC 5800 Cinema 5+

FEATURE - FUNCTION The Light (LED) flashes red to show that the remote is working and is sending a signal. The SETUP key is used to program your Cinema 5.

User Guide OVERVIEW Thank you for purchasing the One For All® Cinema 5™ universal remote control with learning. Along with being a complete Home Theater universal remote, the Cinema 5’s sophisticated technology will allow you to finally consolidate the clutter of all of the original remotes in your home entertainment system. Through patented learning technology, you can teach your Cinema 5 the unique features of your original remotes and create the complete universal remote control – only from One For All. Before you can use your new remote control, you will need to program it to operate the specific home entertainment components you wish to control. Follow the instructions detailed in this manual to set up your Cinema 5 and enjoy your new remote control. FEATURES AND FUNCTIONS The illustration below and the chart on the next three pages describe the features and functions of the Cinema 5 universal remote control. Use the drawing to locate each feature of the remote, then refer to the chart for a description of what function each feature performs.

CBL/SAT

DVD/LD

RCVR

The POWER key controls power ON and OFF the same as the POWER key on your original remote. Please note that most CD Players do not have an ON/OFF function on the original remote control. If this is the case with your CD Player, then POWER will have no effect on your CD Player. The TV, VCR, CBL/SAT, DVD/LD or RCVR keys are used to select the home entertainment component you want to control. If your component does not respond when you press a key on the remote control, press the appropriate device key (TV, VCR, CBL/SAT, DVD/LD or RCVR) first to tell the remote control which component you would like the remote to operate.

The VOL (Volume Up), VOL (Volume Down) and MUTE keys control the volume the same as the Volume Up and Down and Mute keys on your original remote.

The CH (Channel Up) and CH (Channel Down) keys change channels the same as the Channel Up and Down keys on your original remote. The CH / keys also control the following functions in other modes: DVD/LD mode = Skip Forward/ Skip Reverse, RCVR, AUX and CD mode = Preset Up/Preset Down. The Digit keys (0-9) control direct channel access the same as the Digit keys on your original remote. The Digit keys (0-9) may also control the following functions in other modes: RCVR and AUX modes = Input Selections. The ENTER key operates the same as the Enter key on your original remote. If your original remote control required you to use an Enter key to change channels, use the ENTER key on the Cinema 5 after entering your channel number. The ENTER key may also control the following functions in other modes: RCVR and AUX modes = TAPE MON. The PREV CH (Previous Channel) key operates the same as the Last Channel or Recall key on your original remote. The PREV CH key may also control the following functions in other modes: DVD/LD, RCVR and CD mode = Random.

SET

The CH ▲ / ▼, VOL ▲ / ▼, MUTE, PREV CH and Digit (0-9) keys are made of a phosphorescent material that glows-in-the-dark. Expose the keys to bright light to activate the glow-in-the-dark feature. The length of time the keys remain illuminated will be determined by the length of time the remote is exposed to bright light.

The SWAP key swaps the Picture-in Picture window and the TV’s main picture. The SWAP key may also control the following functions in other modes: CBL/SAT mode = SAT.

The SLEEP key accesses the Sleep Timer of your home entertainment components (TV, CBL/SAT, RCVR and AUX modes only). Even if your component does not have a Sleep Timer, the Cinema 5 may access its own built-in sleep timer. See page 29 for additional information.

The MOVE PIP key moves the Picture in-Picture window around your TV screen. The MOVE PIP key may also control the following functions in other modes: DVD/LD mode = Angle, CBL/SAT mode = Next.

The REW (Rewind), PL (PLAY), FF (Fast Forward)