New GE 45129 WIRELESS ALARM SySTEM CONTROL CENTER Owners Manuals, User Guides, Instructional Help Documents & Operating Information - 45129-QuickGuide-Eng.pdf
Citation
Quick Start Guide AC Power Adapter Control Center
Creating a new security code
Add a Sensor to any Zone
Step 1 - On the Control Center press and hold the “Learn” button, then press and hold the “Arm” button together until a long beep sounds. Release buttons, the green power button will begin to flash. Step 2 - Enter the current code (default is 1234) Step 3 - Enter new code Step 4 - Re-enter new code to confirm
Step 1 - Press and hold the “Learn” button, for three seconds, the Control Center will sound a long beep. Release the button. Step 2 - Select the Zone number, the Zone LED will begin to flash.
Step 1
Step 2
1 2 3 4 1
2
3
4
Arm
Step 3
Armed Power
Step 4
Step 2
-
Step 1
+
4 “AAA” Batteries
-
-
-
Learn
Learn
+
1 2 3 4
(Not Included) Recommended for back-up situations
-
+ Mute
Arm
Alert
Arm
Learn
2
3
4
2
3
4
Off
Zone
Garage Door Sensor
Step 3 - Activate the Sensor Window/Door Sensor
Off
Armed Power
Chime
Armed Power
Chime
1
Step 3
Alert
1
Mute
+
-
1 2 3 4
Input DC 12V
+
Input DC 12V
Learn
Zone
+
45129
The Control Center operates in three ways: Armed/Alarm Mode | Notification Mode | Dedicated Alert Mode
Zone
Zones 1,2, & 3 - Activating HOME or AWAY Mode
Armed/Alarm Mode
HOME Mode
AWAY mode
Alarm System - Only Sensors in Zones 1, 2, 3 will trigger alarm - Arm/HOME - Instant alarm - Arm/AWAY - Delay ALARM allows for exit and re-entry
Step 1 - Enter four digit Security Code Step 2 - Press and Hold “Arm ” button button until the Armed LED indicator turns on
Step 1 - Enter four digit Security Code Step 2 - Press “Arm” button twice. The Armed LED indicator begins flashing. You have 45 seconds to exit before Alarm is active
Note: Motion Sensor will only trigger alarm in AWAY Mode
To disarm Alarm, enter four digit Security Code. The Armed LED indicator will turn off.
Note: Motion Sensors do not operate in HOME Mode
To disarm Alarm, enter four digit Security Code. The Armed LED indicator will turn off.
Step 1 Step 1 Step 2
1 2 3 4 Zone
1
2
3
4
1 2 3 4
Arm
Armed
1
Power
2
3
4
1 2 3 4
Arm 1
Armed Power
Armed
3
4
Zones
Zones
Zone 1, 2, & 3 Visual/Audio Alert
2
Arm
Armed Power
Zone
Zone
Zones
Step 2
Armed
Zone 4 - Alert Only
Notification Mode
Dedicated Alert Mode
Sensors in Zone 4
- Only Sensors in Zones 1, 2, 3 will activate notifications - Select from visual alert, single chime or continuous alert (beeping) when Sensor is activated Example Zone 1 - Front door Three Mode settings
Zone 4 is designed to continuously monitor select areas. Sensors assigned to Zone 4 will immediately and automatically start monitoring. No special settings are required.
- When a Sensor is activated, the amber LED will flash and a continuous 4 beeps will sound.
“Alert” - Continuous Tone “Chime” - Single Tone “Off” - Lights only
& back door Zone 2 - All windows Zone 3 - Gates & sheds
Note: Zone 4 is not controlled by Notification Mode switch, and does not activate alarm Examples - water heater, garage door, back gate
- To temporarily stop Alert (beeping) once Sensor has been activated, press “Mute” button on Control Center. - Sensor must be closed (i.e. door closed, water leak stopped) to discontinue Zone 4 notification
Input DC 12V
Input DC 12V
-
1 2 3 4
Arm
-
+
Mute
Learn
Learn
Notification switches
Alert Chime
Zone
1
2
3
4
Armed
Power
Off
1 2 3 4
1 2 3 4
Arm
2
3
4
Armed Power
Zone
Zone
1
2
3
4
Armed
Power
Alert
Off
Zone
Zone
Silent Alert
Arm
Mute
Chime
1
Zones
Alarm Siren
Adding a Silent Alert
Adding an Alarm Siren
Install batteries Step 1 - Press and hold the “Learn” button on inside of the Silent Alert. The LED’s will begin to flash
Plug-in AC Adapter Step 1 - Press and hold the “Learn” button on inside of the Alarm Siren. The LED’s will begin to flash
Step 2
Bottom of Alarm Siren
Step 1
+
Mute
On/Off
Zone indicators - Each number indicates a unique zone. Each Zone can hold up to four Sensors. Any combination of Sensors types can be assigned to any of the four Zones.
Step 1
Le