LED Lenser X7R Rechargeable Flashlight

LED LENSER®* 1

Focusable Fokusierbar Enfocable Focalisable Focuseerbaar フォーカス 포커스 调焦

Close Schließen Cerrar Fermer Sluiten 閉める 닫다 关闭 On/Off An/ Aus Encendido/Apagado Marche/Arrêt Aan/Uit オン／オフ 켜짐/꺼짐 开/关 Open Öffnen Abrir Ouvrir Open 開ける 열다 打开

2

X7R 3

4 5

* English Thank you for choosing one of our products. To familiarize yourself with this product, please read the following instructions. Item LED LENSER 8408-R LED LENSER X7R Version 1.1 Battery 1x ICR18650 lithium-ion rechargeable battery( Item No. 7704) Turning the flashlight ON and OFF To control the flashlight ON and OFF and to choose the 3 light programs etc., push the button at the end of the flashlight. Use on the road, please follow the state regulations on road traffic signals. The X7R is equipped with our Smart Light Technology (SLT). By using a micro-processor the illumination of the LED is controlled and different light programs and light functions can be used. Due to a single button, the interface features a simple, user friendly design which means that the operator can always activate the light on the max brightness setting. The flashlight has various different light output functions. There are two Energy Modes, three light programs and eight light functions. The button at the end of the flashlight is used to turn the device ON and OFF and to choose between the different modes. There are three ways of using the button. You can switch, you can touch (the button is lightly pressed just once without being fully depressed and the flashlight retains its previous setting when the button is released) and keep touched. Energy Modes By choosing master mode of Energy Saving or Constant Current you take a decision concerning the way of using the energy of the rechargeable battery. 1. Energy Saving: This mode allows the flashlight to control the light output by its built in Smart Light Technology (SLT). The light output will be adapted to the real life behaviour of normal flashlight usage. 2. Constant Current: This mode allows the continuous use of all light programs with constant light output, just regulated by the built in control unit. In both Energy Modes the brightness of the light function Boost and Power (100%) remains at a constant level for approximately 2 minutes and then drops in the following 5 minutes in the Constant Current Mode to approx. 60% of the brightness and to approx. 50% in the Energy Saving Mode. 60% in the Energy Mode Constant Current remain until the battery is empty. 50% of the maximum brightness in the Energy Saving Mode remain for approx. 25 minutes and then drop to 15%. This 15% brightness remains until the battery is empty. To change between the two Energy Modes you have to touch the button 8 times and then press the button fully within 5 seconds. If you change to the Energy Mode Energy Saving the flashlight indicates this by starting bright and dimming down until it turns off after 3 sec. If you change to the Energy Mode Constant Current the flashlight indicates this by starting bright and turning off suddenly after 3 seconds. Light programs and light functions You can choose one of the three light programs (1. Professional, 2. Easy and 3. Defence) and the light functions. When the flashlight is off, touch the button 4 times and then turn the flashlight on. Once the activation is successful the flashlight will confirm your choice by flashing the number of the corresponding activated light program. 1. Professional: When you are in this light program the flashlight starts with the light function Power (100%) when it is switched on, just like in all other three light programs. Then you have two options. You can touch the button to activate the 15% brightness of the light function Dim. Alternatively keep the button touched for continuous dimming and choose the required brightness by releasing the button. Continuing to touch the button will eventually take you to the other light functions of this light program. First comes the light function Blink (3Hz), then S.O.S. and finally Defence Strobe (20Hz). As the sequence of the light functio