K-Sun Corporation BEE3 Portable Shrink Tube - Label Kit Owners Manuals, User Guides, Instructional Help Documents & Operating Information - BEE3EZ-QSG-Card%20(2).pdf
Citation
■ The Return ➥ key locks in your commands. Use it to select your settings. ■ Use the settings. ✶
◆ ■
▼
✖
Print !
@
1
2
#
3
$
4
Q W E R
ON/OFF
●
‹
Quick Start Guide
Main Key Functions
%
5
^
6
&
7
*
8
(
9
)
—
+
0
–
=
T Y
{
“ }
➥
For help finding keys, locate these symbols on the keyboard above: ■ ▼ ◆ ●
✖ ➥✶
‘
arrow keys to scroll through
■ To DELETE ALL text, HOLD down Shift key and Press DELETE ✖. ALL Shows on Screen. Press Return ➥ ■ To DELETE PARTIAL text, use ➔ Arrow to place Cursor to the right of the character to be erased. Press Esc/Bs ✖
Changing Text Size 1.
Enter Text.
2.
Press Size ●. Continue to Press Size until desired Text Size and Format is reached ✶Text Size is shown inside LCD display box.
3.
Press Preview
4.
Press Print ■.
▼
Change the Font
Make a Simple Label
Let’s make a serial number with date for the front of your user’s manual. 1. Consult your box for the serial number and turn printer on. 2.
Your display should show 1 (for line 1) and a flashing cursor.
3.
Enter the serial number. Press Return ➥
4.
Your display should show 2 and a flashing cursor.
Using the Font key.
Change the Font
To use the font you want, press the Font key repeatedly until the font you want appears.
® The BEE3 -EZ, order: BEE3®-EZ+ comes with 14 fonts. Fonts appear in the following
Roman
Hint: The graphic display will change to reflect the font you have selected. 1. Press Font . Font Name and ChangeSample the Text Size Text appears Using the Text Size key. in LCD Screen. Enter your text.
Cable Label
This allows you to create labels that wrap around a cable, wire, tube, pen or any other round-shaped materials. 1. Choose a 218 (3/4” wide) tape cartridge. 2.
Press Shift and the Cable/Flag key.
3.
Cable is Flashing. Press Return ➥
4.
Screen shows Length 2.0”. To accept 2.0” Return ➥ . Or to set a different length use arrow key down q to scroll to a different length then Press Return ➥ . Or arrow up p to Length Off and then Press Return ➥ .
Press the Text Size key repeatedly the font size you want appears. Watch the blocks for graphic 2. Continue tountilPress display changes. Here illustrates the sizesuntil for one line: Font desired font is reached. The text size of the line with the cursor can be checked on the right side of the display. Preview ▼ label before printing.
◆
5.
Enter today’s date. DO NOT PRESS RETURN.
6.
Press Preview ▼. Review the information to see if it is correct.
7.
Press Print ■.
5.
On line 1 enter “PC01”. Press Return ➥
8.
Peel off paper backing and apply.
6.
On line 2 enter “PC01”. Press Return ➥
7.
On line 3 enter “PC01”. Press Return ➥
8.
On line 4 enter “PC01”. Do Not Return.
9.
Press Preview
© K-Sun Corporation, February 2013 SL00471B
Hint: The graphic display will change to reflect the text size you have selected.
3.
Press Print ■. 7
Note: You can only enter 4 lines.
▼. 10. Press Print ■.