Intel YA810E Motherboard - handleiding_ya810e.pdf

Intel YA810E Motherboard Owners Manuals, User Guides, Instructional Help Documents & Operating Information - handleiding_ya810e.pdf

Report DMCA / Copyright

DOWNLOAD PDF

  • 355KB
  • 104 Pages
  • 612 x 792 pts (letter)
  • 104 Downloads
  • 365 Views

 

Citation

Intel® Desktop Board YA810E Technical Product Specification

December 1999 Order Number A00984-001 The Intel® Desktop Board YA810E may contain design defects or errors known as errata that may cause the product to deviate from published specifications. Current characterized errata are documented in the Intel Desktop Board YA810E Specification Update.

Revision History Revision -001

Revision History First release of the Specification.

Date Intel ®

Desktop Board YA810E Technical Product

December 1999

This product specification applies to only standard YA810E boards with BIOS identifier YA810E10A.86A. Changes to this specification will be published in the Intel® Desktop Board YA810E Specification Update before being incorporated into a revision of this document.

Information in this document is provided in connection with Intel products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel products are not intended for use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice. The YA810E board may contain design defects or errors known as errata that may cause the product to deviate from published specifications. Current characterized errata are available on request. Contact your local Intel sales office or your distributor to obtain the latest specifications before placing your product order. Copies of documents which have an ordering number and are referenced in this document, or other Intel literature, may be obtained from: Intel Corporation P.O. Box 5937 Denver, CO 80217-9808 or call in North America 1-800-548-4725, Europe 44-0-1793-431-155, France 44-0-1793-421-777, Germany 44-0-1793-421-333, other Countries 708-296-9333. †

Third-party brands and names are the property of their respective owners.

Copyright  1999, Intel Corporation. All rights reserved.

Preface This Technical Product Specification (TPS) specifies the board layout, components, connectors, power and environmental requirements, and the BIOS for the YA810E desktop board. It describes the standard product and available manufacturing options.

Intended Audience The TPS is intended to provide detailed, technical information about the YA810E board and its components to the vendors, system integrators, and other engineers and technicians who need this level of information. It is specifically not intended for general audiences.

What This Document Contains Chapter 1 2 3 4 5

Description A description of the hardware used on this board A map of the resources of the board The features supported by the BIOS Setup program The contents of the BIOS Setup program’s menus and submenus A description of the BIOS error messages, beep codes, and POST codes

Typographical Conventions This section contains information about the conventions used in this specification. Not all of these symbols and abbreviations appear in all specifications of this type.

Notes, Cautions, and Warnings



NOTE Notes call attention to important information.

CAUTION Cautions are included to help you avoid damaging hardware or losing data.

WARNING Warnings indicate conditions which, if not observed, can cause personal injury.

iii

Intel Desktop Board YA810E Technical Product Specification

Other Common Notation

iv

#

Used after a signal name to identify an active-low signal (such as USBP0#)

(NxnX)

When used in the description of a component, N indicates component type, xn are the relative coordinates of its location on the YA810E board, and X is the instance of the particular part at that general location. For example, J5J1 i