HHB 830 Plus CD Recorder CD Player

CDR830.QXD

16/11/00 10:51

Page 1

HOW TO WRITE CD TEXT

QUICK REFERENCE GUIDE

1. Insert a recordable disc

COMPACT DISC RECORDER

2. Press TEXT to select DISC NAME or ARTIST NAME. After about 2 seconds, a flashing cursor will appear at the left hand side of the display. 3. Rotate the DIGITAL RECORD LEVEL (9 :) control to find a character, then press the same control to select and move the cursor one space to the right. Repeat this procedure until finished, then press TEXT to store the information. Note: it is possible to use the TITLE/MODE button as a shortcut for accessing lower case, upper case and digit/symbol characters.

6

7

8

9

10

4. Confirm that the TEXT has been stored by pressing the TITLE/MODE button. 2

5. To write a TRACK NAME, select the relevant track using 9 :, then press TEXT. After about 2 seconds, a flashing cursor will appear at the left hand side of the display.

3

4

5

16

17 19

16

18

1 11 12 13 14

6. Rotate the DIGITAL RECORD LEVEL (9 :) control to find a character, then press the same control to select and move the cursor one space to the right. Repeat this procedure until finished, then press TEXT to store the information.

20 15

7. Confirm that the TEXT has been stored by selecting the track and then pressing the TITLE/MODE button. 8. CD Text can also be entered from the remote control (see page 30 of the operations manual).

FEATURES & FUNCTIONS

HOW TO MAKE A DISC PLAYABLE IN A STANDARD CD PLAYER - FINALIZE 1. Insert the recorded CD-R or CD-RW which you want to finalize. Note: many CD players are unable to read CD-RW type discs even when finalized. 2. Press FINALIZE and then wait for the display to show approximately 2 minutes on the counter. 3. Press PLAY to start finalization. This process takes approximately 2 minutes. Do not disturb the CDR830 during finalization. You may notice the count down pause temporarily during finalize - this is normal.

MENU FUNCTIONS • • • • • •

COPY FADER T.INC A.LVL D.VOL BALANCE

[PERMIT; ONCE; INHIBT] [1 to 12 seconds] [OFF; 1min; 3min; 5min] [-78 to -24dB] [-84 to +20dB] [ L>C>R; 29 steps]

www.hhb.co.uk HHB Communications Ltd · 73-75 Scrubs Lane, London NW10 6QU, UK Tel: 020 8962 5000 · Fax: 020 8962 5050 · E-Mail: [email protected] HHB Communications Canada Ltd· 260 King Street East, Toronto, Ontario M5A 4L5, Canada Tel: 416 867 9000 · Fax: 416 867 1080 · E-Mail: [email protected] PEX1017-A

1 POWER SWITCH Turns power to the unit on and off. 2 SCROLL Displays any CD Text information (if recorded), by scrolling the information across the display. 3 DISPLAY - BUTTON Selects the different time display modes elapsed track time, remaining track time, total disc playing time, etc.. 4 TITLE/MODE Selects the different name display modes; DISC NAME, ARTIST NAME and TRACK NAME if recorded. 5 MONITOR Enables the user to monitor the input signal prior to recording. This is possible even without a disc in the machine. 6 OPEN/CLOSE Press to open or close the disc loading tray. 7 RECORD For manually starting recording. 8 REC MUTE For creating 4 seconds or more of silence at the end of a recording. 9 ANALOG REC LEVEL Used for adjusting the level of the analogue input source. 10 DIGITAL REC LEVEL Used for adjusting the digital recording level, also accessing and setting the MENU functions and AMS track search. 11 ERASE Allowing user to erase CD-RW discs - last track, range of tracks, TOC (un-finalize) and INITIALISE (complete physical erase of whole CD-RW).

12 FINALIZE For making recordings Red Book compatible so that they can be played back in any CD player. 13 AUTO/MANUAL Switches between automatic and manual track numbering modes. 14 INPUT SELECTOR Selects the analogue, digital coaxial or digital optical input for recording purposes. 15 DISPLAY - SCREEN Shows recording and playback levels, disc and track time information, CD Text, selected input and other useful system information. 16 TRANSPORT CONTROLS Allowing playback, pause, FF, REW and STOP. 17 TEXT Allows the naming of the DISC, and the ARTIST, and also individual TRACK names, before finalization.