HHB 830 Plus CD Recorder CD Player - hhb%20830%20plus%20leaflet.pdf

31/07/2002

15:13

Page 2

TM

HHB CDR830PLUS COMPACT DISC RECORDER

CDR830PLUS_Brochure.qxd

CDR830PLUS_Brochure.qxd

31/07/2002

15:14

Page 3

HHB CDR830 BurnIT PLUS. Now you can burn pr COMPACT DISC RECORDER CDR830 BurnIT PLUS

• KEY FEATURES

• High-precision 24 bit A-D converters and 24 bit multi-level Delta Sigma D-A converters ensure exceptional sound quality

• CD Text display input and editing enables disc, artist and track names to be stored

• SCMS-free digital input • Straightforward digital and analog synchro recording with 1 Track, All Tracks and All Tracks with Finalize synchro modes

•

Digital input gain control enables balancing of recordings made from different digital sources, e.g. CD, DAT, MD, etc.

• Digital left-right balance control

• Double speed CD finalization • Word clock input • Optical, coax and balanced digital I/O’s

• Balanced analog I/O with selectable line/mic gain setting on input

• ALL WE’VE CUT IS THE PRICE

• STORE TEXT WITH YOUR RECORDINGS

As you’d expect from HHB, value and quality are inherent in the design and engineering of the new HHB CDR830 BurnIT CD Recorder. Featuring high precision 24 bit A-D converters with 24 bit multi-level Delta Sigma D-A converters, the CDR830 BurnIT delivers recordings of the highest possible quality. The precise design of the CD laser assembly means that every single CD-R and CD-RW disc written by the BurnIT is exceptionally accurate, providing greater compatibility with other CD players and recorders. Solidly built for studio use, the BurnIT records on readily available, low cost discs (see right) and features an SCMS-free digital input with 3 easy to use synchro record modes and a built-in sample rate converter.

The BurnIT’s CD Text feature enables the user to store disc, track and artist names with every recording. This information is then displayed whenever the disc is played on a CD Text compatible CD player or recorder – perfect for demos, sound libraries, DJs, CD juke boxes, archiving, etc.

Infra-red remote for simple text editing and full recorder control.

A full complement of professional features The CDR830 BurnIT features CD Text, enabling disc, artist and track names to be displayed. Up to 120 characters can be stored for each title, with up to 2000 characters stored in the BurnIT’s memory from the last three unfinalized discs read. Once a CD-R is finalized, the BurnIT will read the text from the disc, not from memory, enabling text from other unfinalized discs to be stored.

The BurnIT’s menu provides access to a number of other features. Fade in and out times can be adjusted from 1 to 12 seconds, the SCMS status of the disc you are burning can be set (Inhibit, Once, Permit) and IDs can be triggered on both analog and digital recordings (without subcode information) by adjusting the auto track increment level threshold from -24 to -78dB in 6dB steps.

CDR830PLUS_Brochure.qxd

31/07/2002

15:14

Page 4

rofessional CDs without burning your budget.

TM

• WARNING! ALL DISCS ARE NOT THE SAME The CDR830 BurnIT PLUS records on both standard and consumer audio CD-R and CD-RW discs. Unlike consumer audio discs, standard discs are widely available and are often lower in cost. HHB produces a wide range of high performance CD recording media, optimised for professional audio use.

CDR74 GOLD

Each entry can be up to 120 characters in length (including spaces), with the title scrolling if it is too long to fit in the display.

• DIGITAL RECORDING MADE SIMPLE It’s easy to record from CD, DAT, MD or hard disk using the BurnIT’s SCMS-free digital input. A built-in SRC accepts sampling rates from 32kHz to 48kHz and there are 3 synchro modes: 1 Track, All Tracks and All Tracks with Finalize. When recording from a digital source, the BurnIT’s digital record gain control can adjust the signal input level, enabling gain adjustment for individual tracks. This is perfect when recording a compilation CD from many different sources, since some tracks may be at a higher or lower

volume level. Each digital input, both coaxial and optical, has its own