Genius Twin Wheel F1 - manual.pdf

Table of Contents

English

…………………………………………………………….. …………………………………

1

Русский

…………………………………………………………….. …………………………………..

2

Estonia

…………………………………………………………….. …………………………………..

3

Latvieṥu

…………………………………………………………….. …………………………………..

4

Lietuviṥkai

…………………………………………………………….. …………………………………..

5

Deutsch

…………………………………………………………….. …………………………………

6

Français

…………………………………………………………….. …………………………………

7

Italiano

…………………………………………………………….. …………………………………

8

ESPAÑOL

…………………………………………………………….. …………………………………

9

Português

…………………………………………………………….. …………………………………

10

Brasil

…………………………………………………………….. …………………………………

11

Nederlands

…………………………………………………………….. …………………………………

12

Česky

…………………………………………………………….. …………………………………

13

Magyar

…………………………………………………………….. …………………………………

14

Polski

…………………………………………………………….. …………………………………

15

Srpski

…………………………………………………………….. …………………………………

16

Ελληνικά

…………………………………………………………….. …………………………………

17

Română

…………………………………………………………….. …………………………………

18

Türkçe

…………………………………………………………….. …………………………………

19

‫ﻋﺮﺑﻲ‬

…………………………………………………………….. …………………………………

20

Қазақ

…………………………………………………………….. …………………………………

21

English I.

Assembly You have two methods to install the steering wheel. Please choose one and follow the directions. 1. Play on desk or table ①. Connect the clamp to the base of the steering wheel as shown in Figure 1 below. ②. Place the TrioRacer Wheel in a comfortable driving position (on a desk or table) and press the base unit down firmly on the surface. (See Figure 2)

Figure 1 Figure 2 2. Play on your thighs ①. Unpack the thigh attachments. ②. Turn the Wheel upside down and locate the assembly pinholes. ③. Insert the thigh attachments into the assembly holder on the bottom side then put the wheel on your thighs as shown in figure 3.

Figure.3 Installation 1. For PC Hardware installation ①. Connect the pedals to the steering column. ②. Connect the USB plug to the USB port of the PC. Note: Do not connect the steering wheel to a USB hub. It only works when it is connected directly to the USB port of the PC. Driver installation ①. The wheel has to be connected to the PC first. Then insert the driver CD into your CD-ROM drive. ②. If the installation program does not start automatically, click on “Start/Run/Browse” and select your CD-ROM drive. ③. Double click on the file “setup.exe” ④. If a request for a “digital signature” in Windows appears, acknowledge the message to continue with the installation anyway. ⑤. After the installation is completed, restart the PC. 2. For Console systems ①. Connect wheel and pedal first. ②. Put wheel connecter into the console of port. ③. Turn on TV set and PS2. III. Advanced Operation Press mode button can alternate analog and digital mode, Red LED will light always to indicate the analog mode and the digital mode will have no Led light to indicate. (The LED has three kinds of color: blue, green and red.) Led Status Mode/ Correspond Levels Operate Process Led Power Off Digital Mode Default Mode at Start-up Red Led Analog Mode/Correspond Level 3 Press the MODE button to switch Analog /Digital Blue Led Correspond Level 1 Level 3 is the default level. Pressing SELECT+RIGHT comes to Level 4, the sensitivity is Green Led Correspond Level 2 more than level 3; pressing SELECT+RIGHT again Blue and Green Correspond Level 4 comes to level 5; Repeat the same process to level Green and Red Correspond Level 5 6, level 1, level 2,..that is circled. Blue and Red Correspond Level 6 II.

Symbol for Separate Collection in European Countries This symbol indicates that this product is to be collected separately. The following apply only to users in European countries:
This product is designated for separate collection at an appropriate collection point. Do not dispose of as household waste.
For more information, contact the retailer or the local authorities in charge of waste management. 1

Русский A. Монтаж Возможны два варианта установки рулевого колеса. Выберите один из них и следуйте дальнейшим указаниям. 1. На столе ①. Присоедините зажим к основанию рулевого колес