GE Zoneline Deluxe Series Cooling & Electric Heat Unit AZ25E07D3B - az25e075d_quick_start.pdf

GE Appliances

AZ25E07D – GE Zoneline Deluxe Series Cooling and Electric Heat Unit

Wall Opening Dimensions Add 1/4" to A and C dimensions for all cut-out size. RAB71 16-1/4” Min. H x 42-1/4” Min. W RAB71 available in 16”, 24”, 28” and 31” depths RAB77 16-1/2” Min. H x 42-3/8” Min. W

Electrical Wiring All wiring, including installation of receptacle, must be made in accordance with local electrical codes and regulations. Note: Aluminum wiring may pose special problems—consult a qualified electrician. Grille Options Stamped Aluminum Grille – RAG60 Exterior Architectural Louvers Durable Polycarbonate: RAG61 or RAG64 (Beige) RAG63 or RAG66 (Bittersweet) RAG62 or RAG65 (Maple) RAG67 (Extruded Aluminum) Retrofit Kits: RAK901L – Wall Case Insulation for use with heat pumps. RAK40 – Deflector Kit to adapt chassis for use with existing exterior architectural louvered grilles. Note: 5500 Series requires Power Connection Kit. Ducted Applications 2500 and 3500 series can be used with ductwork to heat or cool more than one room. RAK6052 Duct Adaptor is applied to top of case over air discharge/RAK601 Duct Extension is applied to right or left of adapter. Locally fabricated ductwork may be added to extend to maximum recommended distance of 15 feet. Electrical Connection 230/208 volt units may be plugged into a receptacle. 265 volt units are provided with a junction box and require direct connection. (NEC Requires 265V Direct Connection) See Architects and Engineers Design Data Manual for electrical connection information including use of sub-base for direct connected units. Installation must comply with local electrical codes and regulations. For additional information on ducted applications, including special adaptors for replacement units, refer to Architects and Engineers Design Data Manual.

Specification Revised 3/02

For answers to your Monogram,® GE Profile™ or GE appliance questions, visit our website at GEAppliances.com or call GE Answer Center® service, 800.626.2000.

Maximum Cord Extension (in inches)

Wall Case Dimensions

A

C

21 B RAB71 Wall Sleeve Heavy-gauge galvanized steel, with insulation. A – 42", B-13-3/4", C-16" RAB77 Wall Sleeve Molded SMC fiberglass-reinforced polyester compound. A – 42-1/8", B-13-7/8", C-16-1/4"

58

GE Appliances

AZ25E07D – GE Zoneline Deluxe Series Cooling and Electric Heat Unit Features and Benefits • Cooling with Electric Heat • 230/208V Model • 7,100/6,900 BTUH • 11.8 EER (BTU/Watt) • Solid-State Thermostat Control • 1.7 Dehumidification (pts/hr) • 240/210 CFM Indoor Fan • Up-Front Filters For Easy Access and Cleaning • “Smart Fan” Fan Cycle • Auto Frost Control • Freeze Sentinel™ Protects Unoccupied Rooms Against Freeze-Up • Electronic Temperature Limiting For Restriction of Room Temperature • Remote Control Compatibility For Wall-Mounted Thermostats • Central Desk Control Compatibility • Concealed Manual Vent Control • AZ25E07D2B – 15 Amps, 2550/2090 Watts; Base Model • AZ25E07D2C – 15 Amps, 2550/2090 Watts; Corrosion Model • AZ25E07D3B – 20 Amps, 3450/2820 Watts; Base Model • AZ25E07D3C – 20 Amps, 3450/2820 Watts; Corrosion Model Specification Revised 3/02