Friedrich New Original ARFB4 Remote Control

Owner’s Manual

ENGLISH FRANÇAIS ESPAÑOL

TYPE : WALL MOUNTED

960-912-12

2

TIPS FOR SAVING ENERGY

TIPS FOR SAVING ENERGY Here are some tips that will help you minimize power consumption when you use your air conditioner. • Do not cool excessively indoors. This may be harmful for your health and may consume more electricity. • Block sunlight with blinds or curtains while you are operating the air conditioner. • Keep doors or windows closed tightly while you are operating the air conditioner. • Adjust the direction of the air flow vertically or horizontally to circulate indoor air. • Speed up the fan to cool indoor air quickly. • Open windows regularly for ventilation as the indoor air quality may deteriorate if the air conditioner is used for many hours. • Clean the air filter once every 2 weeks. Dust and impurities collected in the air filter may block the air flow or weaken the cooling / dehumidifying functions.

ENGLISH

For your records Staple your receipt to this page in case you need it to prove the date of purchase or for warranty purposes. Write the model number and the serial number here: Model number : Serial number : You can find them on a label on the side of each unit. Dealer’s name : Date of purchase :

IMPORTANT SAFETY INSTRUCTIONS

3

IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE. Always comply with the following precautions to avoid dangerous situations and to ensure peak performance of your product.

! WARNING It can result in serious injury or death when the directions are ignored.

! CAUTION It can result in minor injury or product damage when the directions are ignored.

! WARNING

• Do not connect the ground wire to a gas pipe, a lightning rod or a telephone ground wire. It may result in electric shock or product failure. • Use a standard circuit breaker and fuse conforming with the rating of the air conditioner. Failure to do so may result in electric shock or product failure. • Make sure to check that the power cable plug is not dirty, loose or broken and then only insert the plug completely. It may result in electric shock or product failure. • Do not modify or extend the power cable. If the power cable or cord has scratches or skin peeled off or deteriorated then it must be replaced. It may result in fire or electric shock.

• Installation or repairs made by unqualified persons can result in hazards to you and others.

• Don’t use a power cord, a plug or a loose socket which is damaged. It may result in fire or electric shock.

• Installation MUST conform with local building codes or, in the absence of local codes, with the National Electrical Code NFPA 70/ANSI C1-1003 or current edition and Canadian Electrical Code Part1 CSA C.22.1.

• Do not use a damaged power cord or plug. It may result in electric shock or product failure.

• Failure to read and follow all instructions in this manual can result in equipment malfunction, property damage, personal injury and/or death.

Power • Unplug the power plug immediately in the event of a blackout or thunderstorm. Failure to do so may result in fire or electric shock. • Always use a power plug and socket with a ground terminal. Failure to do so may result in electric shock or product failure. • Install a dedicated electric outlet and circuit breaker before you use the air conditioner. Failure to do so may result in electric shock or product failure.

• Make sure that the power plug is not damaged when you move the air conditioner. Failure to doc so may result in electric shock or product failure.

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE. • Do not place a heater or other heating appliances near the power cable. It may result in fire, electric shock, or product failure. • Make sure that the power cord is not pulled or damaged while the air conditioner is operating. Failure to do so may result in fire, electric shock, or product failure. • Do not place any objects on the power cord. It may result in electric shock or product failure.

ENGLISH

• The information contained in the manual is intended for use by a