Freeman PFL618BR 3 in 1 Pneumatic Flooring Nailer - 97586.pdf

FLOOR NAILER CLEAT & STAPLE TYPE

Model 97586 ASSEMBLY AND OPERATING INSTRUCTIONS

Visit our website at: http://www.harborfreight.com

Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL. Copyright© 2007 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.

For technical questions or replacement parts, please call 1-800-444-3353. Manual Revised 10g

SAVE THIS MANUAL Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

Safety Alert Symbol and Signal Words In this manual, on the labeling, and all other information provided with this product: This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.

WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION, used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

NOTICE is used to address practices not related to personal injury. Page 2



CAUTION, without the safety alert symbol, is used to address practices not related to personal injury.

Symbol Definitions Symbol

PSI CFM SCFM

Property or statement Pounds per square inch of pressure Cubic Feet per Minute flow Cubic Feet per Minute flow at standard conditions

NPT

National pipe thread, tapered

NPS

National pipe thread, straight WARNING marking concerning Risk of Eye Injury. Wear ANSI-approved safety goggles with side shields. Warning marking concerning Risk of Puncture Injury. Wear heavy-duty work gloves. Read the manual before set-up and/or use. WARNING marking concerning Risk of Hearing Loss. Wear hearing protection. WARNING marking concerning Risk of Respiratory Injury. Wear NIOSHapproved dust mask/respirator. WARNING marking concerning Risk of Explosion.

IMPORTANT SAFETY INSTRUCTIONS

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS

For technical questions, please call 1-800-444-3353.

SKU 97586

WARNING – When using tools, basic precautions should always be followed, including the following:

c.

Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations.

d.

Use safety equipment. A dust mask, non-skid safety shoes and a hard hat must be used for the applicable conditions. Wear heavy-duty work gloves during use.

e.

Always wear eye protection. Wear ANSI-approved safety goggles with side shields. Always wear hearing protection when using the tool. Prolonged exposure to high intensity noise is able to cause hearing loss.

General a.

To reduce the risks of electric shock, fire, and injury to persons, read all the instructions before using the tool.

Work area a.

Keep the work area clean and well lighted. Cluttered benches and dark areas increase the risks of electric shock, fire, and injury to persons.

b.

Do not operate the tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. The tool is able to create sparks resulting in the ignition of the dust or fumes.

f.

c.

Keep bystanders, children, and visitors away while operating the tool. Distractions are able to resu