Fisher and Paykel GC36 Gas Cooktop Owners Manuals, User Guides, Instructional Help Documents & Operating Information - L0901112.pdf
Citation
Installation
Instructions
US
Installation Irlformation
ES
Informaci6n sobre la instalaci6n
12
FR
Informations sur ]'installation
22
2
@. ,@.
@
,@. @.
GC36
01 GC912 GC912M
599203B 11,2004 US
Safety
& warnings
Electrical Shock Hazard
Flexible appliance connectors shall meet the requirements of ANSI Z21.24 and State Boards. They shall not exceed 36 inches in length.
Disconnect power before servicing the product.
A
Failure to do so could result in death or electrical shock.
CAUTION!
In order to avoid hazard these products must be installed according to these instructions. This product should not be sealed into the bench with silicone or glue. This will make any future servicing difficult. Fisher & Paykel will not be liable for costs associated with releasing such products, nor for damage incurred as a result.
Cut Hazard Beware of sharp edges.
IMPORTANT!
Use polystyrene end caps when carrying the product.
This product must be installed by an authorized person (Warning this product must be installed by a licensed plumber or gas fitter when within the Commonwealth of Massachusetts).
Failure to use caution could result in injury or cuts.
A
appliance. Inform the customer to retain for future reference. This product is supplied with an additional label corltairling the model and serial numbers. It may be affixed to the underside of the product, the inside of a cupboard or to the User Guide.
WARNINGS!
This appliance shall be installed accordance with the installation
in
requirements of the local gas authority or the appropriate installation code or in the absence of local codes with the latest National Fuel Gas Code ANSI Z223.1 or CAN B149.1,2(Canada). building and electrical ad hered to.
Pleaseleave these instructions with the
Local
codes must be
Before Cabinet
you
start
Preparation
Ensure the countertop is square and level and ensure no structural members interfere with space requirements. Make sure the countertop is made of a heat resistant material. We record]mend that the exposed bare wood edges of the cutout be sealed with an oil based paint or moisture proof polyurethane to prevent possible damage from moisture creeping between the cooktop trim and the benchtop.
Parts checklist Gas Cooktop base unit Literature pack (includes LPG kit) Elbow & blue washer (taped to power cord) Regulator (in Polystyrene) Burner heads and caps (check polystyrene carefully before discarding) 3 x Burner grates/trivets (1 x center, 2 x outer) Accessories pack (GCg]2M only)
Electrical Ensure that there is a power supply receptacle (1] 0-120V 60Hz) within reach of the cooktop power cord (30"from the middle of the product). The main cable should not touch any hot metal parts.
Tools needed
Make sure the cooktop is connected to a power supply socket that is electrically grounded in accordance with local codes or in the absence of local codes, with the National Electric Code ANSI/FPA70 or CSA 22.2 (Canada).
Shut-off valve
Phillips No. 2 screwdriver Plumbing fittings as required Woodworking tools as required
Oil based paint (for sealing cutout) For LP Conversio_ O 7/64"x 13A"(Q2.Sx 4Smm) flat screwdriver 9/32"(7mm) box spanner
The power supply must be properly polarized. Reverse polarity will result in continuous sparking of the electrodes, ever] after flame ignition. If the power supply is not properly polarized, it is the responsibility of the customer to have the polarity corrected.
For GC912M LP Conversion Q 7/64"x 13A"(Q2.Sx 4Smm) flat screwdriver Phillips No. 1 screwdriver 9/32"(7mm) box spanner 13/32"(10mm)ring spanner
If there is any doubt as to whether the wall receptacle is properly grounded or polarized, have it checked by a qualified electrician prior to installing the cooktop.
C manifold F
center line
_-
D
Product A Width 13 Depth C Height
GC36 36"(914 ram) 21"(533 turn) ] S/s"(41.5 rnrn)
GC912/GC912M 36"(914 ram) 211/2"(546 ram) 2g/16"(65 ram) GC912 3"(76 ram) GC9]2M
GC36 34_A"(870 ram) [3P/s" 34sA'1
Cutout
I;:Depth F Radius G
19_14"(494 iT]m) [183/ii " 193/_'_
R3/s"(lO ram