Filter Queen Defender Air Purifier

Condition

Possible Cause:

Corrective Action:

Green indicator on On/Off power switch will not illuminate.

Unit is not supplied with power.

• Make sure unit is plugged into outlet. • Check outlet for power. • Check unit for damaged power cord. • Unit requires service.

Green Power On Indicator (leaf) on front panel will not illuminate.

Control panel is not supplied with power, OR control panel is defective.

• Make sure power switch is in the ON position. • Make sure green indicator on power switch is illuminated. • Unit requires service.

Red Filter Replacement Indicator is flashing.

Time to order replacement filter.

• See filter replacement instructions on page 6 .

Red Filter Replacement Indicator is illuminated.

Time to replace filter and reset timer.

• This is a normal operating condition, see Filter Replacement Instructions on Page 6 & 7.

All motor speed indicators flashing, unit will not run. run

Unit is operating in program mode and is currently programmed to be off.

• This is a normal operating condition, see programming instructions on page 4.

No motor speed indicators are flashing, unit will not run.

Unit is operating in program set-up mode.

• This is a normal operating condition, see programming instructions on page 4. • Press the Down Arrow Button once to select high speed.

Unit is operating in program mode and is currently programmed to operate at the speed shown by the indicator.

• This is a normal operating condition, see programming instructions on page 4.

Unit is operating in program set-up mode.

• This is a normal operating condition, see programming instructions on page 4.

One motor speed indicator is flashing, unitspeed is running. One motor indicator is flashing, unit is running. One moor speed indicator is flashing, unitspeed will not run. is One motor indicator flashing, unit will not run.

8

ENGLISH

Troubleshooting Guide