E-Machines eMachines Desktop PC

MU0000000_eM_ENG_V09A3.book

Page a

Wednesday, August 19, 2009

5:06 PM

User Guide EM001

MU0000000_eM_ENG_V09A3.book

Page b

Wednesday, August 19, 2009

5:06 PM

Copyright © 2009. All Rights Reserved. eMachines User Guide Original Issue: 06 / 2009

Model number: __________________________________ Serial number: ___________________________________ Purchase date: ___________________________________ Place of purchase: ________________________________

Visit http://registration.emachines.com and discover the benefits of being an eMachines customer.

MU0000000_eM_ENG_V09A3.book

Page i

Wednesday, August 19, 2009

5:06 PM

Information for your safety and comfort Safety instructions Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product.

Turning the product off before cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

CAUTION for plug as disconnecting device Observe the following guidelines when connecting and disconnecting power to the power supply unit: Install the power supply unit before connecting the power cord to the AC power outlet. Unplug the power cord before removing the power supply unit from the computer. If the system has multiple sources of power, disconnect power from the system by unplugging all power cords from the power supplies.

CAUTION for accessibility Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible. When you need to disconnect power to the equipment, be sure to unplug the power cord from the electrical outlet.

Warnings •

Do not use this product near water.

•

Do not place this product on an unstable cart, stand or table. If the product falls, it could be seriously damaged.

•

Slots and openings are provided for ventilation to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should never be placed near or over a radiator or heat register, or in a built-in installation unless proper ventilation is provided.

•

Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind onto or into the product.

•

To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface.

i

MU0000000_eM_ENG_V09A3.book

Page ii

Wednesday, August 19, 2009

5:06 PM

: •

Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices, HDD, Optical drive, and even exposure risk from lithium battery pack.

Safe listening Follow these instructions, suggested by hearing experts,to protect your hearing. • Gradually increase the volume until you can hear it clearly and comfortably and without distortion. • After setting the volume level, do not increase it afteryour ears adjust. • Limit the amount of time listening to music at high volume. • Avoid turning up the volume to block out noisy surroundings. • Turn the volume down if you can’t hear people speaking near you.

Using electrical power •

This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company.

•

Do not allow anything to rest on the power cord. Do not locate this product where people will walk on the cord.

•

If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating.

•