DSC PK5500 Sixtyfour Zone Programmable LCD Keypad

PK55XX/RFK55XX v1.2

Installation Instructions, Instructions d’Installation, Installatiehandleiding, Istruzioni per l’installazione

English, Français, Nederlands, Italiano 1

2

3

1

2

3

1

2

3

1

2

3

4

5

6

4

5

6

4

5

6

4

5

6

7

8

9

7

8

9

7

8

9

7

8

9

*

0

#

*

0

#

*

0

#

*

0

#

PK5500 RFK5500

PK5501 RFK5501

PK5508 RFK5508

PK5516 RFK5516

WARNING: Please refer to the System Installation Manual for information on limitations regarding product use and function and information on the limitations as to liability of the manufacturer. NOTE: These instructions shall be used in conjunction with the system Installation Manual of the Control Panel with which this equipment is intended to be used. ATTENTION: Ce manuel contient des informations sur les restrictions concernant le fonctionnement et l’utilisation du produit et des informations sur les restrictions en ce qui concerne la responsabilité du fabricant. La totalité du manuel doit être lu

attentivement.

NOTE: Ce manuel doit être utilisé en conjonction avec le Manuel d'installation du Panneau de contrôle. WAARSCHUWING: Raadpleeg de installatiehandleiding van het systeem voor informatie over beperkingen m.b.t. productgebruik en functie en informatie over de beperkingen m.b.t. aansprakelijkheid van de fabrikant. OPMERKING: Deze instructies dienen te worden gebruikt in combinatie met de installatiehandleiding van het systeem van de centrale waarmee deze apparatuur gebruikt wordt. ATTENZIONE: Fare riferimento al manuale di installazione del sistema per avere informazioni sui limiti riguardanti l’uso e il funzionamento del prodotto, nonché sui limiti di responsabilità del produttore. NOTA: Le presenti istruzioni devono essere impiegate in combinazione con il manuale d’installazione del sistema della centrale di controllo con il quale si intende utilizzare l’apparecchiatura.

2 9 0 0 7 7 9 9 R0 0 1

Disassemble Keypad

English

Installation Instructions The PK55XX\RFK55XX keypads can be used on security systems with up to 64 zones. These keypads are compatible with the latest version of the folllowing DSC security systems: •PC580 •PC585 •PC1555MX •PC1565 •PC1616 •PC1832 •PC1864 •PC5005 •PC5008 •PC5010 •PC5015 •PC5016 •PC5020 The RFK55XX keypads combine a wireless receiver with the respective PK55XX keypad.

1. Insert a flat head screwdriver into the provided slot (first of two) 2. Move screwdriver toward the back plastic and lift as in the below diagram. This will unhook one side of the front plastic. 3. Repeat step # 1 and 2 on the second provided slot to disconnect the front plastic and allow access for wiring.

NOTE: * Zone not to be programmed as Fire type or 24h type.

Mounting

You should mount the keypad where it is accessible to designated points of entry and exit. Once you have selected a dry and secure location, perform the following steps to mount the keypad.

Swing to engage

4. Tamper

3 Press to Snap

1 2

Mount and Wire Keypad Knock Out Wiring Slot

Knock Out

Knock Out

Unpacking

The Power keypad package includes the following parts: •One Power keypad •Keypad inner door labels •Four mounting screws •1 tamper switch •2 end-of-line resistors •Installation Instructions

Hooks

3.

Specifications

• Temperature range: -10°C to +55°C (14°F to 131°F), Temperature range for UL/ULC: 0°C to +49°C (32°F to 120°F) • Humidity (MAX): 93%R.H. • Plastic enclosure protection degree: IP30, IK04 • Voltage rating: 12VDC nominal • Connects to control panel via 4-wire Keybus • 1 keypad zone input/PGM output* • PK55XX Current draw: 50mA (standby)/125mA (maximum) • RFK55XX Current draw: 75mA (standby)/135mA (maximum) • Wall mount tamper • 5 programmable function keys • Ready (Green LED), Armed (Red LED), Trouble (Yellow LED), AC (Green LED) • Low temperature sensor • Frequency: 433.92MHz (RFK55XX-433 )/868MHz (RFK55XX-868) • Up to 32 wireless zones (RFK55XX Only)

2.

1.

Tamper Hooks

1. Secure Keypad to wall using mounting holes. Use all 4 screws provided unless mounting on a single gang box. 2. Place keypad into hooks on the backplate and swin