Dry Vacuum

Numatic GVE370 Canister Wet/Dry Vacuum Owners Manuals, User Guides, Instructional Help Documents & Operating Information - Numatic_CharlesJames_Installation.pdf

Report DMCA / Copyright

DOWNLOAD PDF

  • 2MB
  • 16 Pages
  • 419.528 x 595.276 pts
  • 85 Downloads
  • 352 Views

 

Citation

Owner Instructions

Warning! Read instructions before using the machine

GVE 370 CT 370 CT 380 CT 470

www.numatic.com

2

Contents / Kits - A26A / A40A / A43

Wet - Assembling the machine for extraction use

3

4

Wet / extraction - Using the machine

Wet / extraction - Using the machine

5

6

Cleaning the machine

Dry- Assembling the machine

7

8

Dry - Using the Machine

Dry - Using the machine

9

10

Dry - Cleaning the machine / 470 Handle Locking

470 Handle Locking Instructions

Fitting the Face on 1

2

CLICK

CLICK

Removing the Face 1

2

CLICK

11

About the machine

Rating Label - WEEE - PPE - Safety Critical Components

Company name and address

Machine Description

Voltage / Frequency

Max Pressure Splash-proof Rating WEEE Logo

Power Rating Yr / Wk / Serial Number

Class 2 Symbol CE Mark

WEEE Legislation (Waste, Electrical and Electronic Equipment)

Vacuum cleaner, accessories and packaging should be sorted for environmental-friendly recycling. Only for EU countries: Do not dispose of Vacuum cleaner into household waste! According to the European Directive 2002/96/EC on waste electrical and electronic equipment and its incorporation into national law. Vacuum cleaners that are no longer suitable for use must be separately collected and sent for recovery in an environmental-friendly manner.

Weight (Ready to use)

Safety Critical Components Mains lead

HO5VV-F x 10m x 2 x 1.00mm2 Filter Bag (370 - 380 drum) NVM-2 BH >pp< construction 99.6%@0.3µm (470 Drum) NVM-3 AH >pp< construction 99.6%@0.3µm Filter Tritex NVM 604165 >pp< construction 96.0%@0.3µm Microtex

NVM 604311 >pp< construction 99.6%@0.3µm

Microfresh

NVM 604170 >pp< construction 98.4%@0.3µm

PPE

Personal protective equipment that may be required for certain operations.

Ear Protection

Head Protection

Safety Gloves

Dust / Allergens Protection

Eye Protection

Protective Clothing

NOTE: A risk assessment should be conducted to determine which PPE should be worn. Caution Floorsign

Motor

12

Safety Footwear

AirFlo

Suction

Cleaning Range

1200W

38 L/sec

2400mm

28.8m

Capacity Dry

Capacity Wet

Solution Tank

Size

370: 15Litres

370: 9 Litres

370: 6 Litres

370: 355x355x510

Class II Sound Pressure 78.6 dB (Dry) 78.7 dB (Wet) (IEC 60704-2-1) Uncertainty: 0.2 dB (A)

Weight

370: 8.8 Kg

Information for Wet & Dry Use/Spray Extraction Vacuum Cleaners

Information for wet and dry machines

WARNING Read the instruction manual before using the machine. Operators shall be adequately instructed on the use of these machines. As with all electrical equipment, care and attention must be exercised at all times during use, in addition to ensuring that routine and preventative maintenance is carried out periodically to ensure safe operation. Failure to carry out maintenance as necessary, including the replacement of parts to the correct standard could render this equipment unsafe and the manufacturer can accept no responsibility in this respect. The machine shall be disconnected from the mains by removing the plug from the supply socket during cleaning or maintenance and when replacing parts or converting the machine to another function. The machine is not to be used by children or persons with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, unless they have been given supervision or instruction. Children being supervised are NOT to play with the machine. This appliance is intended to be assembled, cleaned and maintained by an adult. This machine is not a toy. CAUTION! If foam/liquid comes out of machine exhaust, switch off immediately. Allow the accumulated liquid to drain out through the machine exhaust, check the float assembly to ensure correct operation, empty the container if full of liquid, reassemble the machine. Immediately upon start up there will be a certain amount of liquid issuing from the machine exhaust which will be the residue of liquid still within the power head. This will be quickly discharged after which the machine should function normally. Liquid ejected from the machine c