Zenith ZP305 3 DEVICE UNIVERSAL REMOTE

ZP305 Owner’s Manual

Table of Contents

Introduction

Introduction ...................................................... 3 Button Functions ............................................... 4 Setup ............................................................... 7 Battery Installation ....................................... 7 Battery Saver ............................................... 7 Code Saver ................................................. 7 Code Entry ....................................................... 7 Direct Code Entry ........................................ 7 Code Search ............................................... 8 Brand Search ............................................... 9 Code Identification Feature ............................. 10 Programming Combo Device Codes ............... 11 VCR/DVD/DVR Punch-Through Feature ....... 11 Volume/Mute Control Feature ......................... 11 Setting Volume/Mute Control, Punch-Through . 12 Setting any Mode to use its own Volume/Mute 12 Troubleshooting .............................................. 13 Instrucciones en Español ................................. 16 Manuel d’instruction ....................................... 30

Congratulations on your purchase of this Universal Remote Control. Universal Remotes let you replace a broken or lost remote or combine more than one remote into one. This remote control operates the common features of most but not all models and brands of IR Infrared Controlled Video Equipment. This remote may provide functions that are not available on your equipment. Some functions of your particular equipment (e.g. menu functions) may not be controlled by this remote. In such cases, use the original remote control for your equipment. Please use this manual to become familiar with your Universal Remote. After you are familiar with your remote the first thing you need to do is to install batteries and setup your remote for your particular product and brand. Thank you for buying this remote and we hope it will give you many years of service.

2

3

Button Functions

Button Functions, cont.

1.

16.

2.

15.

3.

14.

4.

13.

5.

12.

6.

11.

7.

10.

8.

9.

Note: The REC button must be pressed TWICE to record from your VCR. For some brands of VCRs, you might need to press the REC button once, then press it again for three seconds. Some buttons on the remote might have functions that are referred to by different names on the device you are controlling. E.G. PREV. CHAN may be called RECALL, or ENTER may be called DISPLAY. These differences depend on the brand and model of your product. Also, this remote can only operate features that exist on your product. E.G., your product must have Previous Channel ability for the PREV. CHAN button to operate this feature.

4

1. Red Indicator Lights when any button is pressed. 2. TV, VCR/DVD, CBL Selects product to be operated. QUIT Used to exit menu functions. 3. CHANNEL UP/DOWN Changes the channels. CHAPTER +/- controls DVD/CD track selection i.e. DVD/CD Track Skip Up/Down (in DVD and SAT modes). Note the VCR buttons also control DVD when in DVD Mode. 4. INFO Displays/selects on-screen channel information, etc. 5. INPUT For some TVs, press repeatedly to select available viewing sources (antenna, cable, etc.). 6. CODE SEARCH Used for setup. 7. NUMBERS Enter numbers for direct channel selection. Some products require Enter to be pressed after channel selection. 8. ENTER Used after direct channel number entry to immediately change to the selected channel. 9. RECORD, PLAY, STOP, REW, FF, PAUSE VCR control buttons operate your VCR even when the remote is set to operate the TV. Also operates DVD Scan -/+. 10. DOT/DASH Used for digital channels, e.g. 2-3. 11. CC (SUBTITLE) TV Closed Caption (if your TV has this feature) or DVD Subtitle toggle. 12. PREV CHAN/REPEAT Returns to the previously selected channel, or DVD repeat toggle. 13. MENU IN/OUT Toggles in and out of menu mode. Accesses the Menu functions of the device you are controlling. 14. VOLUME UP/DOWN Changes the volume level of the product,