Carrier LCA061P Air Conditioner - iom_015.pdf

WINDOW ROOM AIR CONDITIONER Installation and Operation Manual

Electromechanical

Remote Control CAPACITIES

220V - 60 HZ.

12,000; 18,000; 24000 BTU/HR 220V-240V - 50 HZ. 12,000; 18,000; 24000 BTU/HR

Please read this manual carefully and thoroughly before using your window room air conditioner, and keep it for future reference. All the information included in this manual is subject to change without notice. 035-7952-2871B Rev, A

Contents Main Features

2

Air Conditioner Installation Preparations before installation………………………………………………… Installation Procedures……………………………………………………………… Condensed water drainage…………………………………………………………… IAQ Filters ( OPTIONAL )……………………………………………………………

3 4 5 5

Part Identification For Front Opening Filter Model…………………………………………………… For Pull Down Filter Model…………………………………………………………

6

Control Panel Mechanical (Cool & Heat/Cool Models) Control Panel - Cool Model…………………………………………………………… Control Panel - Heat / Cool Model…………………………………………………… Operation……………………………………………………………………………

7 7 8

Control Panel Electronic (Cool & Heat/Cool Models) Control Panel - Cool Model…………………………………………………………… Control Panel - Heat / Cool Model…………………………………………………… Operation……………………………………………………………………………

9 9 10

Control Panel Electronic (Heat Pump Model) Control Panel - Heat Pump Model…………………………………………………… Operation…………………………………………………………………………………

12

Remote Control Preparation………………………………………………………

13

Operation Tips and Precautions…………………………………………………

14

Care and Maintenance……………………………………………………………

15

Before Calling the Serviceman…………………………………………………

16

Service and Maintenance………………………………………………………

17

1

11

Main Features •Anti-Rust Design This state-of-the-art technology incorporates the use of specially developed noncorrosive materials together with advanced powder coating system that ensures optimum resistance to rust. •Superior Air Distribution The multi-blades condenser fan and blower wheel are made of special engineering plastic, ideal for maximum airflow and smooth, operation. The entire airflow chamber is made of high density EPS insulation material to cut on the blower noise, as well as to improve the unit cooling efficiency. •Durable Quiet Fan Motor The fan motor is totally enclosed and highly energy efficient. Its resilient mounting reduces the transfer of noise to the unit and ensures quiet operation. •Heavy Duty Compressor Compressor has proven heavy duty and durable through years of the most demanding field test. Can withstand up to 54°C temperature. •Slide-Out Chassis This Room Air Conditioner is designed so that the chassis can be released from the cabinet and then moves forward. This provides ready access for inspection and/or servicing of units. •Water Drip Free A condensate removal system slings condensate water out of the base pan and disperses it into a fine mist onto the condenser coil where it evaporates. This unit is drip free up to 70% relative humidity (RH). •4 Way Air Deflection System Adjustable horizontal and vertical vanes give you total control over air direction, and ensure even cooling. •Indoor Air Quality ( IAQ ) Filter - OPTIONAL The state of the art filter consists of Active carbon filter, Electrostatic filter and Zeolite filter.

2

Air Conditioning Installation Preparations Before Installation • The air conditioner is heavy and we recommend two people during installation. The wall or window of the installation area should have sufficient strength and durability for any vibration or noise. If it is weak, reinforcement work should be performed. • Install the unit at downward angle outward so as not to leak the condensed water into the room. See the illustration below. • Avoid locations with salty or sulphurous air, draughts, dampness and flammable gas. • On Outdoor side of air conditioner, be sure to obtain sufficient space on both sides for smooth flow of air. Restriction of outside air will be greatly reducing the cooling efficiency of the air conditioner. See the illustration below.

3

Air Conditioning Installation Installation Procedures 1. Remove the Frame grille from the car