Bravetti Quad Blade Food Processor - 403ec03b-5791-4ebf-9c59-7bdd69b63ca9.pdf

Food Processor with Blender Use and Care Instruction Manual Model BP100

Read Instruction Manual Before Use EURO-PRO Operating LLC Boston, MA, 02465 1 (800) 798-7398 www.euro-pro.com

IMPORTANT SAFEGUARDS Read Instruction Manual Before Use When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions before using the appliance. It is suggested that you keep these instructions in a safe place for future reference. 2. Your voltage must correspond to the voltage printed on the bottom of the appliance. 3. To protect against electrical shock, do not immerse the motor housing (base), cord, or plug in water or other liquid. 4. Close supervision is necessary when the appliance is used by or near children. 5. Unplug appliance from outlet when not in use, before putting on or taking off parts and before cleaning. 6. Avoid touching moving parts at all times. 7. Do not operate the appliance with a damaged cord or plug, or after the appliance malfunctions, has been dropped or damaged in any manner. Return the appliance to the nearest service facility for examination, repair, electrical or mechanical adjustment. 8. The use of attachments including canning jars not recommended by the manufacturer may cause fire, electric shock or injury to persons. 9. Do not use outdoors. 10. Do not let cord hang over edge of table or counter or touch hot surfaces. 11. Keep hands and utensils away from moving blades or discs while processing food to reduce the risk of severe injury to persons or damage to the food processor. A scraper may be used but must be used only when the food processor is not running. 12. Blades are sharp. Handle carefully. When handling the chopper blade (C) always hold it by the plastic hub. 13. To reduce the risk of injury, never place cutting blades or discs on the base without first putting bowl properly in place. 14. Be certain cover is securely locked in place before operating appliance. 15. Never feed food by hand. Always use food pusher. 16. Do not attempt to by-pass the cover interlock mechanism. 17. Always operate blender with the cover in place. 18. When blending hot liquids, remove center piece of two-piece cover.

IMPORTANT NOTICE This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electrical shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.

SAVE THESE INSTRUCTIONS FOR HOUSEHOLD USE ONLY REV. 06/02C

Congratulations! As the owner of a new Bravetti Food Processor, you are about to use a very versatile and powerful kitchen appliance that will quickly become an indispensable item in your kitchen. Bravetti products are engineered to meet the highest quality standards and are designed to offer the ultimate in ease of operation and convenience. IMPORTANT INFORMATION Please read all the following instructions carefully. IMPORTANT For your protection, the Bravetti Food Processor has a double safety switch so that it cannot run unless the food processor lid (13) is locked in place and either the safety cover (2) or the blender (8) is also locked in place. PLEASE NOTE A. To remove safety cover (2) or Blender (8), you must first remove the processor lid (13). B. To operate the food processor, the safety cover (2) must be properly locked in place. C. To operate the blender (8), processor lid (13) must be locked in place. D. When operating blender (8) make sure that all attachments are first removed from the food processor bowl (11). E. Do not attempt to use both blender and food processor at the same time. F. Do not attempt to by-pass the cover (2) safety interlock mechanism or the main lid interlock.

To remove the blender, you must first unlock and remove the processor lid (A). Then unlock and remove the blender (B) by twisting clockwise.

WARNING: Always remove the blender and fit the safety cover (2) into the processor body when using the