450-R Deluxe Remote Starter with Keyless Entry

.

.

.

. WARRANTY

Alert Warranty Information Product warranty returns must only be submitted by an authorized dealer. All Alert models have a Limited Lifetime Warranty on the main control module. All parts excluding the control module have a two year warranty against defects in workmanship. This includes the shock sensors, remote transmitters and sirens. The control module will be repaired or replaced at our discretion for up to a 24 month period at no charge. After 24 months a $30.00 fee will be charged for repair or replacement of the control module. Removal and reinstallation charges are not the responsibility of JBS Technologies, LLC the manufacturer of Alert. Warranty registration must be completed within 14 days of the original date of purchase. Registration can be mailed in or performed on line at www.alertautomotive.com. JBS Technologies makes no warranty against the theft of a vehicle or its contents. This warranty only extends to the original system purchaser and the vehicle it was originally installed on. Limitation of Remedies The purchasers remedy is limited to the repair or replacement of the unit and in no event shall exceed the purchase price. Incidental, consequential and or indirect damages are expressly disclaimed. No person or entity is authorized to alter or amend this limited lifetime warranty.

.

. TABLE OF CONTENTS INSTALATION DIAGRAM ..............................................................8 H1: 6 PIN HEAVY GAUGE WIRING HARNESS ................................9 H1/1 VIOLET Wire – Starter Output. .............................................9 H1/2 & H1/3 RED Wires – (+) 12V Power Input ..............................9 H1/4 YELLOW Wire- Ignition 1 Output ...........................................9 H1/5 PINK Wire – Ignition 2 Output ..............................................9 H1/6 BROWN – Accessory Output (Heater/ACC Output) .................10 H2: 5 PIN WIRE HARNESS..........................................................10 H2/1 RED/WHITRE Wire – Parking Light Relay Input......................10 H2/2 WHITE Wire – Parking Light Relay Output.............................10 H2/3 BLACK Wire – System Ground ............................................10 H2/4 BROWN Wire – Horn Output/ Factory Rearm Output ..............10 H2/5 RED Wire – System (+)12Volt Constant Power Input .............11 H3: 2 PIN WHITE CONNECTOR FOR LED .....................................11 H4: 5 PIN WHITE HARNESS........................................................11 H4/1 BLUE/BLACK Wire – Ignition 3 Output..................................11 H4/2 BLACK/WHITE Wire – Dome Light Supervision/Starter Crank Output ...........................12 H4/3 LT. GREEN/BLACK Wire – 2 Step Unlock/Factory Disarm Output .......................................12 H4/4 RED/WHITE Wire – Trunk/Channel 3 Output .........................13 H4/5 ORANGE Wire – Starter Disable Output ................................13 H5: 6 PIN BLACK HARNESS ........................................................14 H5/1 BLACK/WHITE Wire – Instant Start and Stop/Negative Door Input ..............................14 H5/2 VIOLET Wire – (+) Positive Door Pin Input ...........................14 H5/3 GREY Wire – Negative Safety Shut Down/Hood Pin Switch Input.....................14 H5/4 BROWN/RED Wire – Positive Safety Shut Down/Brake Input ...15 H5/5 THIN BLACK Wire – Remote Start Enable/Neutral Safety Input16 H5/6 VIOLET/WHITE Wire – Tach Input/Oil Sensor Input................16 H6: 2-PIN BLUE CONNECTOR FOR PROGRAM/VALET SWITCH .........17 H7: 3-PIN DOOR LOCK CONNECTOR.......................................17-19 H8: 3-PIN BLACK CONNECTOR FOR WINDSHIELD ANTENNA ..........19 3 450IM 6/04

.

. TABLE OF CONTENTS PROGRAMMING AND TESTING ...................................................20 PROGRAMMING A NEW TRANSMITTER .......................................20 Alarm Feature #1 Programming..................................................20 Alarm Feature Programming Chart #1 .........................................21 Alarm Feature #2 Programming....................